Skip Top Navigation

Qualified Products List (QPL)

Do not submit application and money prior to contacting the QPL Engineer.

The proprietary Wall Design Review process is temporarily closed to new applications.


The Qualified Products List is compiled by Washington State Department of Transportation's (WSDOT) Materials Laboratory.

Search the QPL by selecting a manufacturer or a standard specification .  

The QPL is a database of over 1,300 construction materials that have been pre-approved for use in WSDOT highway construction. Where there is a conflict between the QPL and the contract provisions, the contract provisions shall take precedence over the QPL. WSDOT is not responsible for errors or omissions in the QPL.

In accordance with WSDOT Standard Specifications for Road, Bridge and Municipal Construction Section 1-06.1(1), this website is considered to be the current QPL.

Products that do not perform or found to be noncompliant with WSDOT specifications may be removed at any time from the QPL. These products will not be re-entered into the QPL or approved for use in the State of Washington until such time that adherence to the specifications can be verified and the products have undergone satisfactory performance evaluation.
 
QPL Submittals - Materials  



Effective January 1, 2017 the Department will only process applications accompanied by an initial payment of $250. This will cover the cost to determine what will be required for evaluation of the Product. Once this process is complete, an initial evaluation package will be sent to the applicant. This package will include a request for additional payment as necessary to cover the full cost of the evaluation. Payment can be made either by check or electronically through the Materials Evaluation Program (MEP).

  • To initiate a QPL submittal process, contact the QPL Engineer at 360-709-5442.
  • The following form needs to be completed: 
    o QPL Application Form

QPL Submittals - Hot Mix Asphalt (HMA) Mix Designs and Commercial HMA
 
HMA Mix Design Submittal Flow Chart

WSDOT Standard Practice for HMA Mix Designs QC 8, Standard Practice for Development of Hot Mix Asphalt Mix Designs, contains information on how to submit an HMA Mix Design for QPL evaluation.

QPL Submittal - Recycled Materials Facilities for Recycled Concrete Aggregates (RCA) – RCA Tier 1, RCA Tier 2 and RCA Tier 3

Recycled Materials Facilities approval process flow chart.

RCA Tier 1

  • To initiate the RCA Tier 1 submittal process, contact the QPL Engineer at 360-709-5442.
  • The following form needs to be completed
    o QPL Application Form

RCA Tier 2

  • To initiate the RCA Tier 2 submittal process, contact the QPL Engineer at 360-709-5442.
  • The following form needs to be completed
    o QPL Application Form

WSDOT Standard Practice for Recycled Concrete Aggregates QC 9, Approval of Recycled Materials Facilities of WSDOT Recycled Concrete and Returned Concrete, contains information on how to approve Recycled Concrete Aggregates Facilities for Tier 2.

RCA Tier 3

  • To initiate the RCA Tier 3 submittal process, contact the QPL Engineer at 360-709-5442.
  • The following form needs to be completed
    o QPL Application Form

WSDOT Standard Practice for Recycled Materials Facilities from unknown sources QC 10, Approval of Recycled Materials Facilities from Stockpiles of Unknown Sources, contains information on how to approve Recycled Materials Facilities for Tier 3.

Contractors Guide for Materials Approval Submittal  

Questions or comments?

Contact our office  or contact:

Maha Ablson
QPL Engineer
360-709-5442

Pat Norton
Asst. Materials Quality Assurance Engineer
360-709-5443

Rob Molohon
Materials Quality Assurance Engineer
360-709-5441